Heavy duty, all aluminum, electronic self contained wheel load scale. 1% accuracy. Battery charging cable, connectors and transformer 120 VAC to 12 VDC is included with orders for 2, 4 or 6 scales. Includes (4) Nicad batteries per scale. Totalizer cables are optional. One scale will read the total weight of all previous scales and itself by pressing the LOCAL/TOTAL button. Totalizer cable and charger cable use the same connector on the scale. Totalizing is normally done while the scales are in use. Charging is normally done at night, while scales are not in use. Special cables for both charging and totalizing are available on special order. 200 hours continuous use before recharge. Low power LCD display is easy to read in daylight and has LAMP switch for back lit display for use at night. Serial 20 ma current loop, 1200 baud output to printers or remote displays. PRINT switch will start serial output of the local weight. Separate switches for ON and OFF control power. When scale is turned on the display units will be lb. The LB/KG switch will change the display units to either kg or lb. HOLD/RELEASE switch places the scale in automatic capture mode for in-motion weighing when in the HOLD position. RELEASE places the scale in normal static weighing mode. ZERO/TEST switch will set zero and check for motion to HB-44, and also performs internal test. 16" x 20" x 3"H, 42 lb. NTEP 90-106, Class IV, 400 div, for PT300-50

Note:

• *Battery operated portable computer and tape printer.
  Prints axle, axle group, total weight, time & date, etc.
• **Price per foot is $1.50

Specification Sheet