Brand: Mark-10
Model: 7808
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands.Pair of jaws, G1101, 1.18" length (included with G1101)..
$140.00
Ex Tax:$140.00
Brand: Mark-10
Model: 7809
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands.Pair of jaws, G1101, 1.97" length..
$210.00
Ex Tax:$210.00
Brand: Mark-10
Model: 7810
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands.Pair of jaws, G1101, 3.15" length..
$285.00
Ex Tax:$285.00
Brand: Mark-10
Model: 7811
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands.Pair of jaws, G1101, 3.94" length..
$330.00
Ex Tax:$330.00
Brand: Mark-10
Model: 6381
Designed for tack force testing of pressure-sensitive adhesives, in conformance
with ASTM D6195 and related standards.
A looped sample is loaded onto the test strip, and the closed end of the loop
is secured by an upper grip (not included - suggested model: G1008).
The test strip may be indexed in t..
$980.00
Ex Tax:$980.00
Brand: Mark-10
Model: 7812
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands.
Inline adapter, Series 3/2 force gauges
These adapters allow a force gauge to be used in inline pull testing or
weighing applications.
A 5/16-18 threaded hole at each end is axially aligned wit..
$120.00
Ex Tax:$120.00
Brand: Mark-10
Model: 6382
This rugged grip is ideal for general tensile and pull testing applications up
to 2,000 lbF (9 kN).
Pyramidal jaw faces and generous clearance effectively secure a wide range of
sample materials and sizes.
Includes an adjustable stop for consistent sample placement between the
jaws.
Extended jaw len..
$710.00
Ex Tax:$710.00
Brand: Mark-10
Model: 7813
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands.
Inline adapter, Series 7/5*/4 force gauges
These adapters allow a force gauge to be used in inline pull testing or
weighing applications.
A 5/16-18 threaded hole at each end is axially aligned ..
$155.00
Ex Tax:$155.00
Brand: Mark-10
Model: 6383
This grip is ideal for general tensile and pull testing applications up to 200
lbF (1,000 N).
Pyramidal jaw faces and generous clearance effectively secure a wide range of
sample materials and sizes.
Extended jaw lengths are available, to accommodate larger samples.
Includes integrated eye end mount..
$390.00
Ex Tax:$390.00
Brand: Mark-10
Model: 8321
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands.
Inline adapter, Series E force gauges
These adapters allow a force gauge to be used in inline pull testing or
weighing applications.
A 5/16-18 threaded hole at each end is axially aligned with ..
$155.00
Ex Tax:$155.00
Brand: Mark-10
Model: 6384
Designed for wire, rope, and yarn pull testing applications.
Secures the free end of the sample via a bollard and vise.
Includes an integrated eye end mount...
$710.00
Ex Tax:$710.00
Brand: Mark-10
Model: 8322
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands.
Convenient for when the standard emergency switch is inaccessible, for example
if a shield is used.
Includes an 8'(2.4 m) cable, and plugs directly into the rear of the test
stand.
The standard..
$295.00
Ex Tax:$295.00
Brand: Mark-10
Model: 6385
Designed for wire, rope, and yarn pull testing applications.
Secures the free end of the sample via a bollard and vise with rubber-faced
jaw.
Includes an integrated eye end mount...
$455.00
Ex Tax:$455.00
Brand: Mark-10
Model: 8323
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands.
Pair of mounting posts for F1505, F1505S, ESM750, and ESM750S
AC1055 mounting plate required for ESM750/ESM750S..
$60.00
Ex Tax:$60.00
Brand: Mark-10
Model: 6386
Designed to engage the tab on a flip cap for pull-off force measurements.
A spring-loaded hook retracts as it is lowered into the starting position, then snaps into place below the tab...
$180.00
Ex Tax:$180.00
Brand: Mark-10
Model: 8324
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands.
Pair of mounting posts for ESM1500 and ESM1500S
AC1055 mounting plate required..
$60.00
Ex Tax:$60.00
Brand: Mark-10
Model: 6387
This fixture is designed to extract a cork stopper out of a bottle for pull
force measurements, in conformance with ISO 9727.
The G1105 accommodates up to 1.5 L bottles, and is compatible with both natural
and synthetic stoppers.
To use, load the bottle onto the spring loaded tray.
The neck is secur..
$1,430.00
Ex Tax:$1,430.00
Brand: Mark-10
Model: 8325
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands.
Helps protect the rear connectors against liquid entry.
Three rubber covers are supplied, for the 15-pin multi-use connector, micro USB connector, and power jack...
$25.00
Ex Tax:$25.00
Brand: Mark-10
Model: 6801
This general purpose self-centering vise can be used in a wide range of tension
and compression testing applications.
Wide opening range accommodates large and unique samples.
Rugged design permits testing up to 500 lbF (2,500 N).
Smooth removable jaws can be field-modified to improve sample grippin..
$890.00
Ex Tax:$890.00
Brand: Mark-10
Model: 8326
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands...
$450.00
Ex Tax:$450.00
Brand: Mark-10
Model: 6802
This hook features a snap clasp, for added safety in pull testing
applications.
Swiveling action ensures proper alignment.
Four rigid hook sizes are also available...
$130.00
Ex Tax:$130.00
Brand: Mark-10
Model: 8327
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands...
$525.00
Ex Tax:$525.00
Brand: Mark-10
Model: 6803
This fixture is designed for peel testing of tapes, films, foil seals, and
other materials, per ASTM D6862/D3330/D903.
A large, flat working table moves horizontally as the test stand's crosshead
moves up via direct cable linkage.
An optional adjustable-angle mount tilts the fixture up to +- 30 degr..
$2,140.00
Ex Tax:$2,140.00
Brand: Mark-10
Model: 8328
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands.
Adapter, G1023/G1058 grip to G1109..
$150.00
Ex Tax:$150.00
Brand: Mark-10
Model: 6804
The G1110 is designed for determining the puncture resistance of plastic films
and other materials up to 1,000 lbF (5 kN), in conformance with ASTM D5748.
The fixture's generous height accommodates materials with long elongation.
Four toggle clamps and a compression ring with concentric ridges effec..
$2,915.00
Ex Tax:$2,915.00
Brand: Mark-10
Model: 8329
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands.
Adapter, G1109 to ESM750/ESM1500, F755/F1505 test stands..
$175.00
Ex Tax:$175.00
Brand: Mark-10
Model: 6805
The G1111 secures textile webbing, tape, and braided materials typically used
in construction, shipping, and other industrial uses.
The grip is ideal for conformance to ASTM D6775 and related standards,
accommodating a wide range of sample widths and forces up to 2,000 lbF (10
kN).
Includes integrat..
$860.00
Ex Tax:$860.00
Brand: Mark-10
Model: 8330
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands.
Spare chuck key for G1010-2, size KK..
$10.00
Ex Tax:$10.00
Brand: Mark-10
Model: 8331
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands.
Spare chuck key for G1010/G1010-1, size KGA..
$10.00
Ex Tax:$10.00