410 & 422 IDS Indicator

Preprogramed with 10 different modes of operation to accommodate most of the basic scale applications. Keys for ZERO, TARE, GROSS/NET, UNITS, PRINT, CLEAR, ITEM, +, -,

Mode 0: Normal for basic gross or net weighing.
Mode 1: Keyboard Tare for keyboard entry of tare weight for net weight calculation.
Mode 2: Accumulate w/running total for gross or net weights and running total for job, lot, etc. Calculates G,T,N totals
Mode 3: Print Weight w/Subtotal & Total for job or lot subtotal. Totalize and clear at the end of the run.
Mode 4: Manual (Axle) Weigh Push the PRINT button to sequentially number and print a series of weighments. Push Total to print and clear the total and sequence number.
Mode 5: Auto (Axle) Weigh Similar to Mode 4 except printing is automatic when motion stops. Traffic light control, trip level selection and delay times for control functions.
Mode 6: Auto Axle Weigh on Long Scales Scale is automatically tared after each weighment. Operation and controls as in Mode 5.
Mode 7: Peak Hold for display and print of the peak weight in gross or net mode.
Mode 8: Over/Under Checkweigh has (3) TTL outputs and (2) setpoints. Outputs for use with lights or alarms to indicate OVER, UNDER or BETWEEN setpoints.
Mode 9: Bulkweigh has a setpoint with remote start/stop option and fill control relay signal. Scale empty weight and draft weights are configurable. Use for multiple drafts with total and subtotal printing.
Canadian AM 5216
NTEP 96-133 III 10,000 div

Specification Sheet - 410               Specification Sheet - 422