Strain gauge load cell and mount
2 mv/v, 350 ohm input, 350 ohm output
15 ft 4 wire cable
IP67 stainless steel load cell and mount
This tank mount assembly uses a beam load cell with a blind load hole that has a flat loading surface. Expansion and contraction due to thermal changes and side load from external forces are handled with rocker pin mounting. After the side load has been removed the mount will re-center itself using the rocker pin. This mount is unequalled for repeatability. Overload and over-lift protection. Integral lateral stops.
| Part Number | Capacity | Weight | Stock | Available | Price | Buy |
|---|---|---|---|---|---|---|
Tank Mount Assembly | ||||||
| TTM-500-SS Totalcomp beam w/mount | 500 lb | 19.00 | 2869 | 1 | $1,619.00 | Buy |
| TTM-4K-SS Totalcomp beam w/mount | 4,000 lb | 19.00 | 2537 | 2 | $1,619.00 | Buy |
Replacement Load Cells | ||||||
| TB745-500-SS Totalcomp beam only | 500 lb | 4.00 | 3072 | 3 | $462.00 | Buy |
| TB745-4K-SS Totalcomp beam only | 4,000 lb | 7.00 | 3075 | 5 | $462.00 | Buy |
| TB745-5K-SS Totalcomp beam only | 5,000 lb | 5.00 | 3076 | 23 | $635.25 | Buy |
| TB745-10K-SS Totalcomp beam only | 10,000 lb | 6.00 | 3077 | 5 | $750.75 | Buy |
Address 
Email Us At:
Phone: 201-797-2718 
Need help?
We are on Skype!
(Mon-Fri. 8:00AM - 5:00PM ET)
Copyright © 1979-2018 Totalcomp Scales and Components
