Brand: Mark-10
Model: 5951
For use with digital force gauges, digital torque gauges, digital force/torque
indicators and test stands.
For use with all Mark-10 force gauges and torque gauges powered by rechargeable batteries...
$20.00
Ex Tax:$20.00
Brand: Mark-10
Model: 5724
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands.
Interface cable, gauge to test stand crosshead
Compatible instruments:Series 7, 5, 4 instruments with ESM303, ESM1500/ESM750 test stands, 11"
For data output from a force gauge or torque gauge ..
$135.00
Ex Tax:$135.00
Brand: Mark-10
Model: 5879
Lever operated test stand using rack and pinion.
Large base plate with (5)#10-32 holes for fixture mounting.
Mounting holes for bench mounting.
Maximum travel 9".
6"W x 10"D x 13.3"H..
$690.00
Ex Tax:$690.00
Brand: Mark-10
Model: 5881
Hand wheel operated test stand that is upgradeable to a motorized stand.
Modular design, base may be removed and the stand may be used as a component of
a larger system.
Field upgradable to a motorized stand (ESM) by installing a motor drive
kit.
6"W x 10"D x 23"H..
$1,155.00
Ex Tax:$1,155.00
Brand: Mark-10
Model: 5889
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands...
$325.00
Ex Tax:$325.00
Brand: Mark-10
Model: 5911
For use with digital force gauges, digital torque gauges, digital force/torque indicators, and test stands.
For use between a force gauge and another attachment or grip...
$20.00
Ex Tax:$20.00
Brand: Mark-10
Model: 8119
Force gauge, 0.12 lbF / 2 ozF / 50 gF / 0.5 N / 500 mN..
$1,650.00
Ex Tax:$1,650.00
Brand: Mark-10
Model: 7641
Force gauge, 0.12 lbF/2 ozF/50 gF/0.5 N/500 mN..
$1,940.00
Ex Tax:$1,940.00
Brand: Mark-10
Model: 8108
Force gauge, 0.12 lbF / 2 ozF / 50 gF / 0.5 N / 500 mN..
$2,670.00
Ex Tax:$2,670.00
Brand: Mark-10
Model: 5766
The M7i professional digital force/torque indicator is designed to work with a
wide range of Mark-10 remote force and torque sensors.
With exclusive Plug & Test technology, all calibration and configuration data
is saved within the sensor's smart connector, not the indicator, allowing for
true inter..
$1,740.00
Ex Tax:$1,740.00
Brand: Mark-10
Model: 5810
Small size, remote operation.
Measures tensile and compressive forces.
Accuracy:0.15% FS.
NIST traceable calibration certificate included...
$700.00
Ex Tax:$700.00
Brand: Mark-10
Model: 5803
Stainless steel construction.
Small size, measures compressive forces only.
Accuracy: 0.5% FS.
Remote operation.
NIST traceable calibration certificate included...
$880.00
Ex Tax:$880.00
Brand: Mark-10
Model: 5818
Rugged aluminum housing, small size.
Remote operation.
Measures tensile and compressive forces.
Accuracy: 0.15% FS + BGI.
NIST traceable calibration certification included...
$915.00
Ex Tax:$915.00
Brand: Mark-10
Model: 6745
Extremely compact force measurement sensor for tensile and compressive loads in
a limited space.
This sensor features outstanding mechanical overload protection of up to 1,000%
of full scale for most applications and threaded holes on two sides for the
mounting of attachments or implements.
Member o..
$1,750.00
Ex Tax:$1,750.00
Brand: Mark-10
Model: 5850
Bi-directional, small size.
Rugged aluminum housing
Remote operation.
Accuracy: 0.35%FS
NIST traceable calibration certificate included...
$1,020.00
Ex Tax:$1,020.00
Brand: Mark-10
Model: 5857
Torque sensor, 10 ozFin, 700 gFcm, 7 kgFmm, 70 Nmm, 7 Ncm..
$955.00
Ex Tax:$955.00
Brand: Mark-10
Model: 5837
Small size, remote operation.
Universal mounting, may be used for torque tool calibration or as a component
of a torque testing system.
Accuracy: 0.35% of full scale.
NIST traceable calibration certificate included...
$975.00
Ex Tax:$975.00
Brand: Mark-10
Model: 6734
Rugged all metal construction.
Converts any wrench to a torque tool.
May be used as torque tool or as a component of a torque testing system.
Accuracy: 0.6% of full scale NIST traceable calibration certificate included...
$1,375.00
Ex Tax:$1,375.00
Brand: Mark-10
Model: 4514
Cap torque tester, 12 lbFin / 192 ozFin / 14 kgFcm / 135 Ncm / 1.35 Nm..
$1,610.00
Ex Tax:$1,610.00
Brand: Mark-10
Model: 6900
Simple, yet accurate solution for testing torque screwdrivers, wrenches and
other tools.
Solid aluminum housing make it rugged enough for many years of service in
production or laboratory use.
Universal receptacle with square drive and grooves accepts common bits and
attachments.
Applications exist ..
$1,495.00
Ex Tax:$1,495.00
Brand: Mark-10
Model: 7512
Designed for clockwise and counter-clockwise torque testing.
Capacities from 10 ozFin to 100 lbFin.
Dedicated torque sensor with Jacobs chuck is used to grip a sample, bit, or
fixture.
Hand held or mounted to a test stand.
USB output gives continuous or individual readings to a PC.
Set point indicat..
$1,595.00
Ex Tax:$1,595.00
Brand: Mark-10
Model: 5965
Calibration, force or torque measuring instrument, with NIST certificate with data..
$260.00
Ex Tax:$260.00
Brand: Mark-10
Model: 5867
Mounting holes for bench mount.
Loading lever can be positioned in 30 degree increments for ease of
operation.
Adjustable travel stops, precision ground rack and pinion mechanism.
Optional digital travel display, frictional low force brake.
6"W x 8"D x 26"H
Test stand, lever-operated, 750 lbF, verti..
$1,245.00
Ex Tax:$1,245.00
Brand: Mark-10
Model: 5872
The lever operated Force Measurement Test Stand Model TSB100 is an economical
solution for quick-action tensile testing and compression testing of up to 100
lbF (500 N) of force.
Constructed of rugged components, this test stand is durable enough for the factory floor, yet precise enough for laborat..
$990.00
Ex Tax:$990.00
Brand: Mark-10
Model: 5876
Hand wheel operated with Precision Acme screw and nut.
Loading table with (25)10-32 holes for fixture mounting.
Mounting holes for bench mounting.
6"W x 8"D x 26"H..
$1,720.00
Ex Tax:$1,720.00
Brand: Mark-10
Model: 5547
The TSF Force Measurement Test Stand is ideal for spring testing, destructive
testing, product integrity testing, and other applications requiring up to
1,000 lbF (5 kN) of push or pull force.
The stand features a large side mounted hand wheel requiring minimal user
effort and a rigid 3" x 3" column..
$2,625.00
Ex Tax:$2,625.00
Brand: Mark-10
Model: 6740
Ultra smooth hand wheel operation ensures ease of use and a lever operated
slider with travel stops makes engaging and disengaging samples quick and
efficient.
Versatile modular design allows it to be configured for a variety of torque
sensors and gripping fixtures.
Maximum angular travel; no limit...
$3,410.00
Ex Tax:$3,410.00
Brand: Mark-10
Model: 840
Series TSTM-DC advanced motorized torque test stands are designed for a wide
variety of applications, including closure torque testing, fastener torque
testing, and more.
Two torque capacities are available, 100 lbFin (11.5 Nm) and 200 lbFin (22 Nm).
The stands include a torque loading plate with ta..
$8,925.00
Ex Tax:$8,925.00
Brand: Mark-10
Model: 7521
Wire crimp pull testing.
A manual ergonomic lever applies force or a motorized unit will automatically
apply load to a selected load or load until the sample breaks.
Adjustable wire terminal fixture fits wire sizes up to AWG 3 or 0.25".
The motorized tester starts automatically when sample is loaded..
$2,620.00
Ex Tax:$2,620.00
Brand: Mark-10
Model: 5937
For data output from a force gauge or torque gauge to a PC or other devices...
$80.00
Ex Tax:$80.00
Brand: Mark-10
Model: 7705
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands...
$2,265.00
Ex Tax:$2,265.00
Brand: Mark-10
Model: 5952
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands.
Notes:
1. AC1030 replaces 08-1007
2. AC1031 replaces 08-1008
3. Any of the above adapters are compatible with any Mark-10 force or torque
gauge, except Series MG and MGT gauges manufactured be..
$45.00
Ex Tax:$45.00
Brand: Mark-10
Model: 5725
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands.
Interface cable, indicator to test stand crosshead
Model M7i and M5i indicators with ESM303H test stand, 14"
For data output from a force gauge or torque gauge to a PC or other devices..
$135.00
Ex Tax:$135.00
Brand: Mark-10
Model: 5880
Lever operated test stand using rack and pinion.
Large base plate with (5)#10-32 holes for fixture mounting.
Mounting holes for bench mounting.
Maximum travel 9".
6"W x 10"D x 13.3"H..
$810.00
Ex Tax:$810.00
Brand: Mark-10
Model: 5800
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands...
$325.00
Ex Tax:$325.00
Brand: Mark-10
Model: 5921
For use with digital force gauges, digital torque gauges, digital force/torque indicators, and test stands.
For use between a force gauge and another attachment or grip...
$25.00
Ex Tax:$25.00
Brand: Mark-10
Model: 6766
For use with, digital force gauges, digital torque gauges, digital force/torque indicators, and test stands...
$22.00
Ex Tax:$22.00
Brand: Mark-10
Model: 8120
Force gauge, 0.25 lbF / 4 ozF / 100 gF / 1 N / 1000 mN..
$1,500.00
Ex Tax:$1,500.00
Brand: Mark-10
Model: 7642
Force gauge, 0.25 lbF/4 ozF/100 gF/1 N/1000 mN..
$1,765.00
Ex Tax:$1,765.00
Brand: Mark-10
Model: 5799
Indicator for use with fully interchangeable force and torque sensors with
personality modules containing all calibration and user-set data.
4-1/2 digit LCD, 0.3" high characters.
Keys are: POWER, UNITS, ZERO, DATA, MODE, CLEAR, ADVANCE,ESCAPE.
Average mode for obtaining average force readings over ..
$1,025.00
Ex Tax:$1,025.00
Brand: Mark-10
Model: 5811
Small size, remote operation.
Measures tensile and compressive forces.
Accuracy:0.15% FS.
NIST traceable calibration certificate included...
$700.00
Ex Tax:$700.00
Brand: Mark-10
Model: 5804
Stainless steel construction.
Small size, measures compressive forces only.
Accuracy: 0.5% FS.
Remote operation.
NIST traceable calibration certificate included...
$880.00
Ex Tax:$880.00
Brand: Mark-10
Model: 5819
Rugged aluminum housing, small size.
Remote operation.
Measures tensile and compressive forces.
Accuracy: 0.15% FS + BGI.
NIST traceable calibration certification included...
$915.00
Ex Tax:$915.00
Brand: Mark-10
Model: 6746
Extremely compact force measurement sensor for tensile and compressive loads in
a limited space.
This sensor features outstanding mechanical overload protection of up to 1,000%
of full scale for most applications and threaded holes on two sides for the
mounting of attachments or implements.
Member o..
$1,750.00
Ex Tax:$1,750.00
Brand: Mark-10
Model: 5851
Bi-directional, small size.
Rugged aluminum housing
Remote operation.
Accuracy: 0.35%FS
NIST traceable calibration certificate included...
$1,020.00
Ex Tax:$1,020.00
Brand: Mark-10
Model: 5858
Torque sensor, 20 ozFin, 1400 gFcm, 14 kgFmm, 140 Nmm, 14 Ncm..
$955.00
Ex Tax:$955.00
Brand: Mark-10
Model: 5838
Small size, remote operation.
Universal mounting, may be used for torque tool calibration or as a component
of a torque testing system.
Accuracy: 0.35% of full scale.
NIST traceable calibration certificate included...
$975.00
Ex Tax:$975.00
Brand: Mark-10
Model: 6735
Rugged all metal construction.
Converts any wrench to a torque tool.
May be used as torque tool or as a component of a torque testing system.
Accuracy: 0.6% of full scale NIST traceable calibration certificate included...
$1,375.00
Ex Tax:$1,375.00
Brand: Mark-10
Model: 6808
Simple, yet accurate solution for testing torque screwdrivers, wrenches and
other tools.
Solid aluminum housing make it rugged enough for many years of service in
production or laboratory use.
Universal receptacle with square drive and grooves accepts common bits and
attachments.
Applications exist ..
$1,495.00
Ex Tax:$1,495.00
Brand: Mark-10
Model: 7513
Designed for clockwise and counter-clockwise torque testing.
Capacities from 10 ozFin to 100 lbFin.
Dedicated torque sensor with Jacobs chuck is used to grip a sample, bit, or
fixture.
Hand held or mounted to a test stand.
USB output gives continuous or individual readings to a PC.
Set point indicat..
$1,595.00
Ex Tax:$1,595.00
Brand: Mark-10
Model: 5968
Load cell replacement & calibration, force gauge, TT01, TT02, TT05, w/NIST cert w/data..
$450.00
Ex Tax:$450.00
Brand: Mark-10
Model: 5868
Mounting holes for bench mount.
Loading lever can be positioned in 30 degree increments for ease of
operation.
Adjustable travel stops, precision ground rack and pinion mechanism.
Optional digital travel display, frictional low force brake.
6"W x 8"D x 26"H
Test stand, lever-operated, 750 lbF, horiz..
$1,245.00
Ex Tax:$1,245.00
Brand: Mark-10
Model: 5877
Hand wheel operated with Precision Acme screw and nut.
Loading table with (25)10-32 holes for fixture mounting.
Mounting holes for bench mounting.
6"W x 8"D x 26"H..
$1,720.00
Ex Tax:$1,720.00
Brand: Mark-10
Model: 5548
The TSF Force Measurement Test Stand is ideal for spring testing, destructive
testing, product integrity testing, and other applications requiring up to
1,000 lbF (5 kN) of push or pull force.
The stand features a large side mounted hand wheel requiring minimal user
effort and a rigid 3" x 3" column..
$2,625.00
Ex Tax:$2,625.00
Brand: Mark-10
Model: 6741
Ultra smooth hand wheel operation ensures ease of use and a lever operated
slider with travel stops makes engaging and disengaging samples quick and
efficient.
Versatile modular design allows it to be configured for a variety of torque
sensors and gripping fixtures.
Maximum angular travel; no limit...
$3,410.00
Ex Tax:$3,410.00
Brand: Mark-10
Model: 841
>eries TSTM-DC advanced motorized torque test stands are designed for a wide
variety of applications, including closure torque testing, fastener torque
testing, and more.
Two torque capacities are available, 100 lbFin (11.5 Nm) and 200 lbFin (22 Nm).
The stands include a torque loading plate with ta..
$8,925.00
Ex Tax:$8,925.00
Brand: Mark-10
Model: 7522
Wire crimp pull testing.
A manual ergonomic lever applies force or a motorized unit will automatically
apply load to a selected load or load until the sample breaks.
Adjustable wire terminal fixture fits wire sizes up to AWG 3 or 0.25".
The motorized tester starts automatically when sample is loaded..
$4,890.00
Ex Tax:$4,890.00
Brand: Mark-10
Model: 5938
For data output from a force gauge or torque gauge to a PC or other devices...
$80.00
Ex Tax:$80.00
Brand: Mark-10
Model: 7706
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands...
$710.00
Ex Tax:$710.00
Brand: Mark-10
Model: 5953
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands.
Notes:
1. AC1030 replaces 08-1007
2. AC1031 replaces 08-1008
3. Any of the above adapters are compatible with any Mark-10 force or torque
gauge, except Series MG and MGT gauges manufactured be..
$45.00
Ex Tax:$45.00
Brand: Mark-10
Model: 5885
Hand wheel operated test stand that is upgradeable to a motorized stand.
Modular design, base may be removed and the stand may be used as a component of
a larger system.
Field upgradable to a motorized stand (ESM) by installing a motor drive
kit.
6"W x 10"D x 23"H..
$925.00
Ex Tax:$925.00
Brand: Mark-10
Model: 5912
For use with digital force gauges, digital torque gauges, digital force/torque indicators, and test stands.
For use between a force gauge and another attachment or grip...
$20.00
Ex Tax:$20.00
Brand: Mark-10
Model: 5767
The M3i digital force/torque indicator is designed to work with a wide range of
Mark-10 remote force and torque sensors.
With exclusive Plug & Test technology, all calibration and configuration data
is saved within the sensor's smart connector, not the indicator, allowing for
true interchangeability..
$675.00
Ex Tax:$675.00
Brand: Mark-10
Model: 8121
Force gauge, 0.5 lbF / 8 ozF / 250 gF / 2.5 N / 2500 mN..
$1,125.00
Ex Tax:$1,125.00
Brand: Mark-10
Model: 7643
Force gauge, 0.5 lbF/8 ozF/250 gF/2.5 N/2500 mN..
$1,410.00
Ex Tax:$1,410.00
Brand: Mark-10
Model: 5812
Small size, remote operation.
Measures tensile and compressive forces.
Accuracy:0.15% FS.
NIST traceable calibration certificate included...
$700.00
Ex Tax:$700.00
Brand: Mark-10
Model: 5769
Small size, remote operation.
Measures tensile and compressive forces.
Accuracy:0.15% FS.
NIST traceable calibration certificate included...
$700.00
Ex Tax:$700.00
Brand: Mark-10
Model: 5805
Stainless steel construction.
Small size, measures compressive forces only.
Accuracy: 0.5% FS.
Remote operation.
NIST traceable calibration certificate included...
$880.00
Ex Tax:$880.00
Brand: Mark-10
Model: 5820
Rugged aluminum housing, small size.
Remote operation.
Measures tensile and compressive forces.
Accuracy: 0.15% FS + BGI.
NIST traceable calibration certification included...
$765.00
Ex Tax:$765.00
Brand: Mark-10
Model: 6747
Extremely compact force measurement sensor for tensile and compressive loads in
a limited space.
This sensor features outstanding mechanical overload protection of up to 1,000%
of full scale for most applications and threaded holes on two sides for the
mounting of attachments or implements.
Member o..
$1,750.00
Ex Tax:$1,750.00
Brand: Mark-10
Model: 5852
Bi-directional, small size.
Rugged aluminum housing
Remote operation.
Accuracy: 0.35%FS
NIST traceable calibration certificate included...
$1,020.00
Ex Tax:$1,020.00
Brand: Mark-10
Model: 5859
Torque sensor, 50 ozFin, 3600 gFcm, 36 kgFmm, 350 Nmm, 35 Ncm..
$955.00
Ex Tax:$955.00
Brand: Mark-10
Model: 5839
Small size, remote operation.
Universal mounting, may be used for torque tool calibration or as a component
of a torque testing system.
Accuracy: 0.35% of full scale.
NIST traceable calibration certificate included...
$975.00
Ex Tax:$975.00
Brand: Mark-10
Model: 6736
Rugged all metal construction.
Converts any wrench to a torque tool.
May be used as torque tool or as a component of a torque testing system.
Accuracy: 0.6% of full scale NIST traceable calibration certificate included...
$1,375.00
Ex Tax:$1,375.00
Brand: Mark-10
Model: 4515
Cap torque tester, 50 lbFin / 800 ozFin / 58 kgFcm / 570 Ncm / 5.7 Nm..
$1,610.00
Ex Tax:$1,610.00
Brand: Mark-10
Model: 6901
Simple, yet accurate solution for testing torque screwdrivers, wrenches and
other tools.
Solid aluminum housing make it rugged enough for many years of service in
production or laboratory use.
Universal receptacle with square drive and grooves accepts common bits and
attachments.
Applications exist ..
$1,495.00
Ex Tax:$1,495.00
Brand: Mark-10
Model: 7514
Designed for clockwise and counter-clockwise torque testing.
Capacities from 10 ozFin to 100 lbFin.
Dedicated torque sensor with Jacobs chuck is used to grip a sample, bit, or
fixture.
Hand held or mounted to a test stand.
USB output gives continuous or individual readings to a PC.
Set point indicat..
$1,595.00
Ex Tax:$1,595.00
Brand: Mark-10
Model: 5970
Sensor replacement & calibration, torque gauge sensor, w/NIST cert w/data..
$610.00
Ex Tax:$610.00
Brand: Mark-10
Model: 5875
The lever operated Force Measurement Test Stand Model TSB100 is an economical
solution for quick-action tensile testing and compression testing of up to 100
lbF (500 N) of force.
Constructed of rugged components, this test stand is durable enough for the factory floor, yet precise enough for laborat..
$115.00
Ex Tax:$115.00
Brand: Mark-10
Model: 842
Series TSTM-DC advanced motorized torque test stands
Designed for a wide variety of applications
Including closure torque testing, fastener torque testing, and more.
Two torque capacities are available, 100 lbFin (11.5 Nm) and 200 lbFin (22 Nm).
The stands include a torque loading plate with tapped ..
$9,950.00
Ex Tax:$9,950.00
Brand: Mark-10
Model: 5967
For data output from a force gauge or torque gauge to a PC or other devices...
$135.00
Ex Tax:$135.00
Brand: Mark-10
Model: 7707
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands...
$2,810.00
Ex Tax:$2,810.00
Brand: Mark-10
Model: 5979
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands.
Notes:
Any of the above adapters are compatible with any Mark-10 force or torque
gauge, except Series MG and MGT gauges manufactured before September, 2010.
These gauges can be modified at the..
$45.00
Ex Tax:$45.00
Brand: Mark-10
Model: 8366
Single column extensions.
Increase the vertical clearance for tall samples.
Multiple extensions may be stacked for very long samples.
Three lengths are available 6, 12 and 24 in [150, 300, and 600 mm].
Not compatible with the AC1086-1 shield...
$425.00
Ex Tax:$425.00
Brand: Mark-10
Model: 5727
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands.
USB cable, type B to A
Compatible instruments:ESM303, ESM303H, ESM1500/ESM750 test stands to PC, 6'
For data output from a force gauge or torque gauge to a PC or other devices..
$30.00
Ex Tax:$30.00
Brand: Mark-10
Model: 5763
Reversible aluminum housing for hand held use or stand mounting.
Programmable analog and digital filters.
Compatible with all Mark 10 test stands and grips.
Keys are: POWER, UNITS, ZERO, DATA, MODE, CLEAR.
Units: lb, kg(g).
4-1/2 digit 0.3" LCD.
62 readings per second.
GCL Gauge Control Language for..
$395.00
Ex Tax:$395.00
Brand: Mark-10
Model: 5882
Lever operated test stand using rack and pinion.
Large base plate with (5)#10-32 holes for fixture mounting.
Mounting holes for bench mounting.
Maximum travel 9".
6"W x 10"D x 13.3"H
Dial indicator kit, 1" travel, brackets included
Because load cell deflection and system deflection are present and n..
$175.00
Ex Tax:$175.00
Brand: Mark-10
Model: 5890
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands...
$265.00
Ex Tax:$265.00
Brand: Mark-10
Model: 5922
For use with digital force gauges, digital torque gauges, digital force/torque indicators, and test stands.
For use between a force gauge and another attachment or grip...
$25.00
Ex Tax:$25.00
Brand: Mark-10
Model: 8122
Force gauge, 2 lbF / 32 ozF / 1 kgF / 1000 gF / 10 N..
$945.00
Ex Tax:$945.00
Brand: Mark-10
Model: 7644
Force gauge, 2 lbF/32 ozF/1 kgF/1000 gF/10 N..
$1,250.00
Ex Tax:$1,250.00
Brand: Mark-10
Model: 5813
Small size, remote operation.
Measures tensile and compressive forces.
Accuracy:0.15% FS.
NIST traceable calibration certificate included...
$700.00
Ex Tax:$700.00
Brand: Mark-10
Model: 5770
Small size, remote operation.
Measures tensile and compressive forces.
Accuracy:0.15% FS.
NIST traceable calibration certificate included...
$700.00
Ex Tax:$700.00
Brand: Mark-10
Model: 5806
Stainless steel construction.
Small size, measures compressive forces only.
Accuracy: 0.5% FS.
Remote operation.
NIST traceable calibration certificate included...
$880.00
Ex Tax:$880.00
Brand: Mark-10
Model: 5821
Rugged aluminum housing, small size.
Remote operation.
Measures tensile and compressive forces.
Accuracy: 0.15% FS + BGI.
NIST traceable calibration certification included...
$765.00
Ex Tax:$765.00
Brand: Mark-10
Model: 6748
Extremely compact force measurement sensor for tensile and compressive loads in
a limited space.
This sensor features outstanding mechanical overload protection of up to 1,000%
of full scale for most applications and threaded holes on two sides for the
mounting of attachments or implements.
Member o..
$1,750.00
Ex Tax:$1,750.00
Brand: Mark-10
Model: 5853
Bi-directional, small size.
Rugged aluminum housing
Remote operation.
Accuracy: 0.35%FS
NIST traceable calibration certificate included...
$940.00
Ex Tax:$940.00
Brand: Mark-10
Model: 5860
Torque sensor, 12 lbFin, 1 lbFf, 192 ozFin, 135 Ncm, 1.35 Nm..
$880.00
Ex Tax:$880.00
Brand: Mark-10
Model: 5840
Small size, remote operation.
Universal mounting, may be used for torque tool calibration or as a component
of a torque testing system.
Accuracy: 0.35% of full scale.
NIST traceable calibration certificate included...
$910.00
Ex Tax:$910.00
Brand: Mark-10
Model: 5845
Rugged all metal construction.
Converts any wrench to a torque tool.
May be used as torque tool or as a component of a torque testing system.
Accuracy: 0.6% of full scale
NIST traceable calibration certificate included...
$1,375.00
Ex Tax:$1,375.00
Brand: Mark-10
Model: 4516
Cap torque tester, 100 lbFin / 1600 ozFin / 116 kgFcm / 115 Ncm / 11.5 Nm..
$1,610.00
Ex Tax:$1,610.00
Brand: Mark-10
Model: 6902
Simple, yet accurate solution for testing torque screwdrivers, wrenches and
other tools.
Solid aluminum housing make it rugged enough for many years of service in
production or laboratory use.
Universal receptacle with square drive and grooves accepts common bits and
attachments.
Applications exist ..
$1,495.00
Ex Tax:$1,495.00
Brand: Mark-10
Model: 7515
Designed for clockwise and counter-clockwise torque testing.
Capacities from 10 ozFin to 100 lbFin.
Dedicated torque sensor with Jacobs chuck is used to grip a sample, bit, or
fixture.
Hand held or mounted to a test stand.
USB output gives continuous or individual readings to a PC.
Set point indicat..
$1,400.00
Ex Tax:$1,400.00
Brand: Mark-10
Model: 5756
Non-warranty repair, force or torque measuring instrument (excluding sensor replacement)..
$240.00
Ex Tax:$240.00
Brand: Mark-10
Model: 5869
Mounting holes for bench mount.
Loading lever can be positioned in 30 degree increments for ease of
operation.
Adjustable travel stops, precision ground rack and pinion mechanism.
Optional digital travel display, frictional low force brake.
6"W x 8"D x 26"H
Digital travel display for TSA750/TSA750H..
$825.00
Ex Tax:$825.00
Brand: Mark-10
Model: 5878
Hand wheel operated with Precision Acme screw and nut.
Loading table with (25)10-32 holes for fixture mounting.
Mounting holes for bench mounting.
6"W x 8"D x 26"H
Digital travel display for TSC1000 / TSC1000H..
$820.00
Ex Tax:$820.00
Brand: Mark-10
Model: 5550
Digital angle indicator for TST-Series stands, 110V
Must be ordered upfront or installed as a retrofit at the factory.
Field retrofit is not possible...
$1,190.00
Ex Tax:$1,190.00
Brand: Mark-10
Model: 843
Series TSTM-DC advanced motorized torque test stands
Designed for a wide variety of applications
Including closure torque testing, fastener torque testing.
Two torque capacities are available, 100 lbFin (11.5 Nm) and 200 lbFin (22 Nm).
The stands include a torque loading plate with tapped holes for ..
$9,950.00
Ex Tax:$9,950.00
Brand: Mark-10
Model: 7523
Wire crimp pull testing.
A manual ergonomic lever applies force or a motorized unit will automatically
apply load to a selected load or load until the sample breaks.
Adjustable wire terminal fixture fits wire sizes up to AWG 3 or 0.25".
The motorized tester starts automatically when sample is loaded..
$895.00
Ex Tax:$895.00
Brand: Mark-10
Model: 7708
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands...
$225.00
Ex Tax:$225.00
Brand: Mark-10
Model: 5980
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands.
Notes:
Any of the above adapters are compatible with any Mark-10 force or torque
gauge, except Series MG and MGT gauges manufactured before September, 2010.
These gauges can be modified at the..
$45.00
Ex Tax:$45.00
Brand: Mark-10
Model: 8367
Single column extensions.
Increase the vertical clearance for tall samples.
Multiple extensions may be stacked for very long samples.
Three lengths are available 6, 12 and 24 in [150, 300, and 600 mm].
Not compatible with the AC1086-1 shield...
$610.00
Ex Tax:$610.00
Brand: Mark-10
Model: 7652
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands.
Serial cable, gauge to RS-232, DB-9
Compatible instruments:Series 7, 5, 4, TT01, TT02, TT05, WT3-201(M) instruments, 6'
For data output from a force gauge or torque gauge to a PC or other devic..
$80.00
Ex Tax:$80.00
Brand: Mark-10
Model: 5801
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands...
$325.00
Ex Tax:$325.00
Brand: Mark-10
Model: 5913
For use with digital force gauges, digital torque gauges, digital force/torque indicators, and test stands.
For use between a force gauge and another attachment or grip...
$20.00
Ex Tax:$20.00
Brand: Mark-10
Model: 8123
Force gauge, 5 lbF / 80 ozF / 2.5 kgF / 2500 gF / 25 N..
$945.00
Ex Tax:$945.00
Brand: Mark-10
Model: 7645
Force gauge, 5 lbF/80 ozF/2.5 kgF/2500 gF/25 N..
$1,250.00
Ex Tax:$1,250.00
Brand: Mark-10
Model: 5814
Small size, remote operation.
Measures tensile and compressive forces.
Accuracy:0.15% FS.
NIST traceable calibration certificate included...
$700.00
Ex Tax:$700.00
Brand: Mark-10
Model: 5771
Small size, remote operation.
Measures tensile and compressive forces.
Accuracy:0.15% FS.
NIST traceable calibration certificate included...
$700.00
Ex Tax:$700.00
Brand: Mark-10
Model: 5807
Stainless steel construction.
Small size, measures compressive forces only.
Accuracy: 0.5% FS.
Remote operation.
NIST traceable calibration certificate included...
$880.00
Ex Tax:$880.00
Brand: Mark-10
Model: 5822
Rugged aluminum housing, small size.
Remote operation.
Measures tensile and compressive forces.
Accuracy: 0.15% FS + BGI.
NIST traceable calibration certification included...
$765.00
Ex Tax:$765.00
Brand: Mark-10
Model: 6749
Extremely compact force measurement sensor for tensile and compressive loads in
a limited space.
This sensor features outstanding mechanical overload protection of up to 1,000%
of full scale for most applications and threaded holes on two sides for the
mounting of attachments or implements.
Member o..
$1,750.00
Ex Tax:$1,750.00
Brand: Mark-10
Model: 5854
Bi-directional, small size.
Rugged aluminum housing
Remote operation.
Accuracy: 0.35%FS
NIST traceable calibration certificate included...
$940.00
Ex Tax:$940.00
Brand: Mark-10
Model: 5861
Torque sensor, 50 lbFin, 4 lbFft, 800 ozFin, 570 Ncm, 5.7 Nm..
$880.00
Ex Tax:$880.00
Brand: Mark-10
Model: 5841
Small size, remote operation.
Universal mounting, may be used for torque tool calibration or as a component
of a torque testing system.
Accuracy: 0.35% of full scale.
NIST traceable calibration certificate included...
$910.00
Ex Tax:$910.00
Brand: Mark-10
Model: 5846
Rugged all metal construction.
Converts any wrench to a torque tool.
May be used as torque tool or as a component of a torque testing system.
Accuracy: 0.6% of full scale
NIST traceable calibration certificate included...
$1,375.00
Ex Tax:$1,375.00
Brand: Mark-10
Model: 7516
Designed for clockwise and counter-clockwise torque testing.
Capacities from 10 ozFin to 100 lbFin.
Dedicated torque sensor with Jacobs chuck is used to grip a sample, bit, or
fixture.
Hand held or mounted to a test stand.
USB output gives continuous or individual readings to a PC.
Set point indicat..
$1,400.00
Ex Tax:$1,400.00
Brand: Mark-10
Model: 5757
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands...
$160.00
Ex Tax:$160.00
Brand: Mark-10
Model: 5870
Mounting holes for bench mount.
Loading lever can be positioned in 30 degree increments for ease of
operation.
Adjustable travel stops, precision ground rack and pinion mechanism.
Optional digital travel display, frictional low force brake.
6"W x 8"D x 26"H
Horizontal/wall mounting kit for TSA750/TS..
$190.00
Ex Tax:$190.00
Brand: Mark-10
Model: 5551
TSF002 Horizonta or wall mounting kit for Mark-10 TSF Series and TST Series stands..
$645.00
Ex Tax:$645.00
Brand: Mark-10
Model: 844
Series TSTM-DC advanced motorized torque test stands
Designed for a wide variety of applications
Including closure torque testing, fastener torque testing.
Two torque capacities are available, 100 lbFin (11.5 Nm) and 200 lbFin (22 Nm).
The stands include a torque loading plate with tapped holes for ..
$9,660.00
Ex Tax:$9,660.00
Brand: Mark-10
Model: 7524
Wire crimp pull testing.
A manual ergonomic lever applies force or a motorized unit will automatically
apply load to a selected load or load until the sample breaks.
Adjustable wire terminal fixture fits wire sizes up to AWG 3 or 0.25".
The motorized tester starts automatically when sample is loaded..
$675.00
Ex Tax:$675.00
Brand: Mark-10
Model: 5955
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands.
Single- and double-handle grips used for mounting a force gauge in various
applications, such as ergonomics testing, job task analysis, and muscle
strength evaluation.
Handles are included wit..
$145.00
Ex Tax:$145.00
Brand: Mark-10
Model: 8368
Single column extensions.
Increase the vertical clearance for tall samples.
Multiple extensions may be stacked for very long samples.
Three lengths are available 6, 12 and 24 in [150, 300, and 600 mm].
Not compatible with the AC1086-1 shield...
$770.00
Ex Tax:$770.00
Brand: Mark-10
Model: 7653
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands.
Cable, gauge to Mitutoyo SPC
Compatible instruments:Series 7, 5, 4, TT01, TT02, TT05, WT3-201(M) instruments, 6'
For data output from a force gauge or torque gauge to a PC or other devices..
$80.00
Ex Tax:$80.00
Brand: Mark-10
Model: 3220
Set of rubber jaws for gripping square or odd shaped containers...
$85.00
Ex Tax:$85.00
Brand: Mark-10
Model: 5802
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands...
$215.00
Ex Tax:$215.00
Brand: Mark-10
Model: 5891
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands...
$200.00
Ex Tax:$200.00
Brand: Mark-10
Model: 5923
For use with digital force gauges, digital torque gauges, digital force/torque indicators, and test stands.
For use between a force gauge and another attachment or grip...
$25.00
Ex Tax:$25.00
Brand: Mark-10
Model: 8124
Force gauge, 10 lbF / 160 ozF / 5 kgF / 5000 gF / 50 N..
$945.00
Ex Tax:$945.00
Brand: Mark-10
Model: 7646
Force gauge, 10 lbF/160 ozF/5 kgF/5000 /50 N..
$1,250.00
Ex Tax:$1,250.00
Brand: Mark-10
Model: 5815
Small size, remote operation.
Measures tensile and compressive forces.
Accuracy:0.15% FS.
NIST traceable calibration certificate included...
$700.00
Ex Tax:$700.00
Brand: Mark-10
Model: 5808
Stainless steel construction.
Small size, measures compressive forces only.
Accuracy: 0.5% FS.
Remote operation.
NIST traceable calibration certificate included...
$1,000.00
Ex Tax:$1,000.00
Brand: Mark-10
Model: 5823
Rugged aluminum housing, small size.
Remote operation.
Measures tensile and compressive forces.
Accuracy: 0.15% FS + BGI.
NIST traceable calibration certification included...
$765.00
Ex Tax:$765.00
Brand: Mark-10
Model: 6750
Extremely compact force measurement sensor for tensile and compressive loads in
a limited space.
This sensor features outstanding mechanical overload protection of up to 1,000%
of full scale for most applications and threaded holes on two sides for the
mounting of attachments or implements.
Member o..
$1,750.00
Ex Tax:$1,750.00
Brand: Mark-10
Model: 5855
Bi-directional, small size.
Rugged aluminum housing
Remote operation.
Accuracy: 0.35%FS
NIST traceable calibration certificate included...
$940.00
Ex Tax:$940.00
Brand: Mark-10
Model: 5862
Torque sensor, 100 lbFin, 8 lbFft, 1600 ozFin, 1150 Ncm, 11.5 Nm..
$880.00
Ex Tax:$880.00
Brand: Mark-10
Model: 5842
Small size, remote operation.
Universal mounting, may be used for torque tool calibration or as a component
of a torque testing system.
Accuracy: 0.35% of full scale.
NIST traceable calibration certificate included...
$910.00
Ex Tax:$910.00
Brand: Mark-10
Model: 5847
Rugged all metal construction.
Converts any wrench to a torque tool.
May be used as torque tool or as a component of a torque testing system.
Accuracy: 0.6% of full scale
NIST traceable calibration certificate included...
$1,375.00
Ex Tax:$1,375.00
Brand: Mark-10
Model: 7517
Designed for clockwise and counter-clockwise torque testing.
Capacities from 10 ozFin to 100 lbFin.
Dedicated torque sensor with Jacobs chuck is used to grip a sample, bit, or
fixture.
Hand held or mounted to a test stand.
USB output gives continuous or individual readings to a PC.
Set point indicat..
$1,400.00
Ex Tax:$1,400.00
Brand: Mark-10
Model: 5552
Column extension for Mark-10
Select from several extension lengths.
Extensions increase clearance between the torque sensor and torque mounting
plate.
See Ordering Information table.
Note: Column extensions do not increase travel distance...
$230.00
Ex Tax:$230.00
Brand: Mark-10
Model: 5871
Mounting holes for bench mount.
Loading lever can be positioned in 30 degree increments for ease of
operation.
Adjustable travel stops, precision ground rack and pinion mechanism.
Optional digital travel display, frictional low force brake.
6"W x 8"D x 26"H
Contains a matrix tapped holes for grip an..
$250.00
Ex Tax:$250.00
Brand: Mark-10
Model: 845
Series TSTM-DC advanced motorized torque test stands
Designed for a wide variety of applications
Including closure torque testing, fastener torque testing.
Two torque capacities are available, 100 lbFin (11.5 Nm) and 200 lbFin (22 Nm).
The stands include a torque loading plate with tapped holes for ..
$9,660.00
Ex Tax:$9,660.00
Brand: Mark-10
Model: 7525
Wire crimp pull testing.
A manual ergonomic lever applies force or a motorized unit will automatically
apply load to a selected load or load until the sample breaks.
Adjustable wire terminal fixture fits wire sizes up to AWG 3 or 0.25".
The motorized tester starts automatically when sample is loaded..
$1,010.00
Ex Tax:$1,010.00
Brand: Mark-10
Model: 5956
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands.
Single- and double-handle grips used for mounting a force gauge in various
applications, such as ergonomics testing, job task analysis, and muscle
strength evaluation.
Handles are included wit..
$135.00
Ex Tax:$135.00
Brand: Mark-10
Model: 8369
Double column extensions.
Accommodate up to a 20 in. [508 mm] wide sample, or 21.5 in [546 mm] round sample.
Three heights are available 6, 12 and 24 in [150, 300, and 600 mm].
Base contains rows of T-slots for fixture mounting.
Not compatible with the AC1086-1 shield...
$1,925.00
Ex Tax:$1,925.00
Brand: Mark-10
Model: 5764
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands.
USB cable, type micro B to A
Compatible instruments:Series 7, 5, 4, 3, TT01, TT02, TT03, TT05, WT3-201(M) instruments to PC, 6'
For data output from a force gauge or torque gauge to a PC or oth..
$30.00
Ex Tax:$30.00
Brand: Mark-10
Model: 5892
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands...
$300.00
Ex Tax:$300.00
Brand: Mark-10
Model: 5914
For use with digital force gauges, digital torque gauges, digital force/torque indicators, and test stands.
For compressing or puncturing a variety of samples...
$20.00
Ex Tax:$20.00
Brand: Mark-10
Model: 8125
Force gauge, 20 lbF / 320 ozF / 10 kgF / 10000 gF / 100 N..
$945.00
Ex Tax:$945.00
Brand: Mark-10
Model: 7647
Force gauge, 20 lbF/320 ozF/10 kgF/10000 gF/100 N..
$1,250.00
Ex Tax:$1,250.00
Brand: Mark-10
Model: 5816
Small size, remote operation.
Measures tensile and compressive forces.
Accuracy:0.15% FS.
NIST traceable calibration certificate included...
$1,000.00
Ex Tax:$1,000.00
Brand: Mark-10
Model: 5809
Stainless steel construction.
Small size, measures compressive forces only.
Accuracy: 0.5% FS.
Remote operation.
NIST traceable calibration certificate included...
$1,000.00
Ex Tax:$1,000.00
Brand: Mark-10
Model: 5824
Rugged aluminum housing, small size.
Remote operation.
Measures tensile and compressive forces.
Accuracy: 0.15% FS + BGI.
NIST traceable calibration certification included...
$765.00
Ex Tax:$765.00
Brand: Mark-10
Model: 6751
Extremely compact force measurement sensor for tensile and compressive loads in
a limited space.
This sensor features outstanding mechanical overload protection of up to 1,000%
of full scale for most applications and threaded holes on two sides for the
mounting of attachments or implements.
Member o..
$1,750.00
Ex Tax:$1,750.00
Brand: Mark-10
Model: 5848
Rugged all metal construction.
Converts any wrench to a torque tool.
May be used as torque tool or as a component of a torque testing system.
Accuracy: 0.6% of full scale
NIST traceable calibration certificate included...
$1,375.00
Ex Tax:$1,375.00
Brand: Mark-10
Model: 5768
Connect common strain gage-based load cells, force sensors, and torque sensors
to Models M7I, M5I, and M3I indicators and Series F test frames with these
user-configurable adapters.
Sensor capacity and resolution may be configured via an included software
utility, which includes a library of common ..
$275.00
Ex Tax:$275.00
Brand: Mark-10
Model: 5553
Column extension for Mark-10
Select from several extension lengths.
Extensions increase clearance between the torque sensor and torque mounting
plate.
See Ordering Information table.
Note: Column extensions do not increase travel distance...
$295.00
Ex Tax:$295.00
Brand: Mark-10
Model: 5759
Upgrade, BGI connector to Plug & Test connector, with NIST certificate with data..
$295.00
Ex Tax:$295.00
Brand: Mark-10
Model: 7526
Wire crimp pull testing.
A manual ergonomic lever applies force or a motorized unit will automatically
apply load to a selected load or load until the sample breaks.
Adjustable wire terminal fixture fits wire sizes up to AWG 3 or 0.25".
The motorized tester starts automatically when sample is loaded..
$620.00
Ex Tax:$620.00
Brand: Mark-10
Model: 5856
For data output from a force gauge or torque gauge to a PC or other devices...
$80.00
Ex Tax:$80.00
Brand: Mark-10
Model: 5957
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands.
Single- and double-handle grips used for mounting a force gauge in various
applications, such as ergonomics testing, job task analysis, and muscle
strength evaluation.
Handles are included wit..
$120.00
Ex Tax:$120.00
Brand: Mark-10
Model: 8370
Double column extensions.
Accommodate up to a 20 in. [508 mm] wide sample, or 21.5 in [546 mm] round
sample.
Three heights are available 6, 12 and 24 in [150, 300, and 600 mm].
Base contains rows of T-slots for fixture mounting.
Not compatible with the AC1086-1 shield...
$2,200.00
Ex Tax:$2,200.00
Brand: Mark-10
Model: 7654
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands.
Analog cable, gauge to dual banana plug
Compatible instruments:Series 7, 5, 4, TT01, TT02, TT05, WT3-201(M) instruments, 6'
For data output from a force gauge or torque gauge to a PC or other d..
$80.00
Ex Tax:$80.00
Brand: Mark-10
Model: 5760
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands...
$85.00
Ex Tax:$85.00
Brand: Mark-10
Model: 4257
8 rubber-edged arms may be individually adjusted in 45 degree increments, for gripping square or odd shaped containers...
$395.00
Ex Tax:$395.00
Brand: Mark-10
Model: 5893
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands.
G1009 include a #10-32 M/M stud with jam nuts..
$55.00
Ex Tax:$55.00
Brand: Mark-10
Model: 5924
For use with digital force gauges, digital torque gauges, digital force/torque indicators, and test stands.
For compressing or puncturing a variety of samples...
$25.00
Ex Tax:$25.00
Brand: Mark-10
Model: 8126
Force gauge, 50 lbF / 800 ozF / 25 kgF / 25000 gF / 250 N..
$945.00
Ex Tax:$945.00
Brand: Mark-10
Model: 7648
Force gauge, 50 lbF/800 ozF/25 kgF/25000 gF/250 N..
$1,250.00
Ex Tax:$1,250.00
Brand: Mark-10
Model: 5817
Small size, remote operation.
Measures tensile and compressive forces.
Accuracy:0.15% FS.
NIST traceable calibration certificate included...
$1,000.00
Ex Tax:$1,000.00
Brand: Mark-10
Model: 5825
Rugged aluminum housing, small size.
Remote operation.
Measures tensile and compressive forces.
Accuracy: 0.15% FS + BGI.
NIST traceable calibration certification included...
$765.00
Ex Tax:$765.00
Brand: Mark-10
Model: 6752
Extremely compact force measurement sensor for tensile and compressive loads in
a limited space.
This sensor features outstanding mechanical overload protection of up to 1,000%
of full scale for most applications and threaded holes on two sides for the
mounting of attachments or implements.
Member o..
$1,750.00
Ex Tax:$1,750.00
Brand: Mark-10
Model: 7518
Series TT03C digital cap torque gauges are quick and economical solutions for
basic handheld cap torque testing.
These portable instruments eliminate the need to secure closures in a fixture
or more elaborate testing system.
A dedicated remote torque sensor with Jacobs chuck is supplied with a unive..
$1,690.00
Ex Tax:$1,690.00
Brand: Mark-10
Model: 5554
Column extensionSelect from several extension lengths.
Extensions increase clearance between the torque sensor and torque mounting
plate.
See Ordering Information table.
Note: Column extensions do not increase travel distance...
$375.00
Ex Tax:$375.00
Brand: Mark-10
Model: 7527
Includes all optional functions listed.
Profiles
Part No. WF010 Save and recall sets of test parameters, such as
speed, pass/fail limits, unit of measurement, etc.
Maximum of 500 profiles may be stored.
Pull to load
Part No. WF011 The tester will stop when the specified load has been reached.
Load h..
$2,080.00
Ex Tax:$2,080.00
Brand: Mark-10
Model: 5958
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands.
Single- and double-handle grips used for mounting a force gauge in various
applications, such as ergonomics testing, job task analysis, and muscle
strength evaluation.
Handles are included wit..
$100.00
Ex Tax:$100.00
Brand: Mark-10
Model: 8371
Double column extensions.
Accommodate up to a 20 in. [508 mm] wide sample, or 21.5 in [546 mm] round
sample.
Three heights are available 6, 12 and 24 in [150, 300, and 600 mm].
Base contains rows of T-slots for fixture mounting.
Not compatible with the AC1086-1 shield...
$2,472.00
Ex Tax:$2,472.00
Brand: Mark-10
Model: 5713
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands.
Serial cable, test stand controller to RS-232 DB9
Compatible Instruments:ESM301(L), TSTM(H)-DC test stands, 10'
For data output from a force gauge or torque gauge to a PC or other devices..
$30.00
Ex Tax:$30.00
Brand: Mark-10
Model: 4258
Spare set of 4 posts, 1.25" (included with TT01)..
$170.00
Ex Tax:$170.00
![CT004 Mark-10 Set of 4 posts 1.25\](https://totalcomp.com/image/cache/product/products-TT01-Torque-Tester-250x250.jpg "CT004 Mark-10 Set of 4 posts 1.25\")
Brand: Mark-10
Model: 4258
Spare set of 4 posts, 1.25\" (included with TT01)..
$170.00
Ex Tax:$170.00
Brand: Mark-10
Model: 5894
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands.
G1009-1 include a 5/16-18 M/M stud with jam nuts..
$90.00
Ex Tax:$90.00
![G1016-2 Mark-10 Jacobs chuck STH 0.375\](https://totalcomp.com/image/cache/product/G1016-2-Mark-10-Jacobs-Chuck-STH-0.375-250x250w.jpg "G1016-2 Mark-10 Jacobs chuck STH 0.375\")
Brand: Mark-10
Model: 5864
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands...
$170.00
Ex Tax:$170.00
Brand: Mark-10
Model: 5915
For use with digital force gauges, digital torque gauges, digital force/torque indicators, and test stands.
For puncturing a variety of samples...
$20.00
Ex Tax:$20.00
Brand: Mark-10
Model: 8127
Force gauge, 100 lbF / 1600 ozF / 50 kgF / 50000 gF / 500 N..
$945.00
Ex Tax:$945.00
Brand: Mark-10
Model: 7649
Force gauge, 100 lbF/1600 ozF/50 kgF/50000 gF/500 N..
$1,250.00
Ex Tax:$1,250.00
Brand: Mark-10
Model: 6817
Series R05 fully enclosed smart sensors are designed for pull/push
measurements.
Useful in ergonomics testing, workplace safety testing, and general lifting or
tension/compression requirements.
Threaded holes are supplied to accommodate various mounting configurations and
attachments.
For up to 500 ..
$875.00
Ex Tax:$875.00
Brand: Mark-10
Model: 7519
Series TT03C digital cap torque gauges are quick and economical solutions for
basic handheld cap torque testing.
These portable instruments eliminate the need to secure closures in a fixture
or more elaborate testing system.
A dedicated remote torque sensor with Jacobs chuck is supplied with a unive..
$1,690.00
Ex Tax:$1,690.00
Brand: Mark-10
Model: 7528
Ring terminal fixture for WT3-201
Multiple pin sizes are provided, from 1/8" to 3/8" [3.2 to 9.5 mm] dia...
$220.00
Ex Tax:$220.00
Brand: Mark-10
Model: 5705
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands.
For mounting an indicator or Series TT03 torque gauge to any TS-Series test stand...
$100.00
Ex Tax:$100.00
Brand: Mark-10
Model: 5714
For use with digital force gauges, digital torque gauges, digital force/torque
indicators and test stands.
Interface cable, gauge to test stand controller
Compatible instruments:Series 7, 5, 4 instruments with ESM301(L), coiled, 32" retracted
For data output from a force gauge or torque gauge to a P..
$135.00
Ex Tax:$135.00
Brand: Mark-10
Model: 5939
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands.
G1009-2 include a #10-32 M/M stud with jam nuts..
$80.00
Ex Tax:$80.00
![G1016-3 Mark-10 Jacobs chuck STH 0.5\](https://totalcomp.com/image/cache/product/G1016-3-Mark-10-Jacobs-Chuck-STH-0.5-250x250w.jpg "G1016-3 Mark-10 Jacobs chuck STH 0.5\")
Brand: Mark-10
Model: 5865
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands...
$175.00
Ex Tax:$175.00
Brand: Mark-10
Model: 5925
For use with digital force gauges, digital torque gauges, digital force/torque indicators, and test stands.
For puncturing a variety of samples...
$25.00
Ex Tax:$25.00
Brand: Mark-10
Model: 8128
Force gauge, 200 lbF / 3200 ozF / 100 kgF / 1000 N / 1 kN..
$1,125.00
Ex Tax:$1,125.00
Brand: Mark-10
Model: 7650
Force gauge, 200 lbF/3200 ozF/100 kgF/1000 N/1 kN..
$1,410.00
Ex Tax:$1,410.00
Brand: Mark-10
Model: 6112
The MR06-200 wire crimp pull sensor is a hand-operated solution for measuring
wire crimp pull-off forces.
The ergonomic handles and convenient tensioning mechanism make field
measurements a breeze for applications up to 200 lbF (1,000 N).
Squeeze the handles together to increase tension on the sampl..
$1,840.00
Ex Tax:$1,840.00
Brand: Mark-10
Model: 7520
Series TT03C digital cap torque gauges are quick and economical solutions for
basic handheld cap torque testing.
These portable instruments eliminate the need to secure closures in a fixture
or more elaborate testing system.
A dedicated remote torque sensor with Jacobs chuck is supplied with a unive..
$1,690.00
Ex Tax:$1,690.00
Brand: Mark-10
Model: 7529
Machinable blank terminal fixture.
For unique sample shapes and sizes...
$200.00
Ex Tax:$200.00
Brand: Mark-10
Model: 5843
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands...
$75.00
Ex Tax:$75.00
Brand: Mark-10
Model: 5954
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands.
G1009-3 include a 5/16-18 M/M stud with jam nuts..
$120.00
Ex Tax:$120.00
Brand: Mark-10
Model: 5916
For use with digital force gauges, digital torque gauges, digital force/torque indicators, and test stands.
For compression testing of round or odd shaped samples...
$20.00
Ex Tax:$20.00
Brand: Mark-10
Model: 8129
Force gauge, 500 lbF / 8000 ozF / 250 kgF / 2500 N / 2.5 kN..
$1,125.00
Ex Tax:$1,125.00
Brand: Mark-10
Model: 7349
Force gauge, 300 lbF / 4800 ozF / 150 kgF / 1500 N / 1.5 kN..
$1,410.00
Ex Tax:$1,410.00
Brand: Mark-10
Model: 849
Wall mounting kit
Pair of mounting legs for adapting the test stand to a bench, instead of the base...
$255.00
Ex Tax:$255.00
Brand: Mark-10
Model: 7530
Carrying case for WT3-201.
Provides storage space for the WT3-201 tester, optional ring terminal fixture, AC adapter, USB cable, and accessories...
$285.00
Ex Tax:$285.00
Brand: Mark-10
Model: 5961
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands...
$125.00
Ex Tax:$125.00
Brand: Mark-10
Model: 5940
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands.
Cable, travel display to Mitutoyo SPC
Compatible instruments:Mitutoyo travel display mounted to ES30, TSA750(H),
TSB100, TSC1000(H), TSF(H), TSFM500(H), TSFM500(H)-DC test stands, 6' cable for ..
$80.00
Ex Tax:$80.00
Brand: Mark-10
Model: 5895
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands...
$120.00
Ex Tax:$120.00
Brand: Mark-10
Model: 5926
For use with digital force gauges, digital torque gauges, digital force/torque indicators, and test stands.
For compression testing of round or odd shaped samples...
$25.00
Ex Tax:$25.00
Brand: Mark-10
Model: 7651
Force gauge, 500 lbF/8000 ozF/250 kgF/2500 N/2.5 kN..
$1,410.00
Ex Tax:$1,410.00
Brand: Mark-10
Model: 850
Column extension + $10 per inch
Select from several extension lengths.
Extensions increase clearance between the torque sensor and torque mounting plate...
$380.00
Ex Tax:$380.00
Brand: Mark-10
Model: 7531
Carrying case for WT3-201M.
Provides storage space for the WT3-201M tester, optional ring terminal fixture, power cord, USB cable, and accessories...
$285.00
Ex Tax:$285.00
Brand: Mark-10
Model: 5503
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands.
Accommodates any Mark-10 indicator or Series TT03 torque gauge (indicator
portion).
Features an angle adjustment to optimize the viewing angle.
Note: For indicator positioning only.
It should ..
$160.00
Ex Tax:$160.00
Brand: Mark-10
Model: 4262
Complete set of brackets, cable, and hardware for calibration of any Series
TT01 torque tester.
Weights not available from Mark-10...
$760.00
Ex Tax:$760.00
Brand: Mark-10
Model: 7532
Calibration kit for WT3-201(weights not included)
Complete set of brackets and hardware for calibration of Mark-10 motorized and
manualwire crimp pull testers.
Weights and hanger not available from Mark-10...
$1,000.00
Ex Tax:$1,000.00
Brand: Mark-10
Model: 8375
Crosshead movement responds to manually pushing or pulling on the force gauge
shaft or load cell.
Increasing force produces greater speeds.
Ideal for setups and quick positioning.
Included when ordering the AC1086-1 shield...
$315.00
Ex Tax:$315.00
Brand: Mark-10
Model: 5941
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands...
$120.00
Ex Tax:$120.00
Brand: Mark-10
Model: 5919
For use with digital force gauges, digital torque gauges, digital force/torque indicators, and test stands.
These attachments are ideal for compression testing of buttons, membrane
switches, etc.
Compatible with Mark-10 force gauges...
$20.00
Ex Tax:$20.00
Brand: Mark-10
Model: 7350
Force gauge, 750 lbF/12000 ozF/375 kgF/3750 N/3.75 kN
* Note: At 500 lbF(2,500 N)or more, force gauges are not recommended for
applications involving sudden, sharp breaks.
Examples include compression of brittle materials, pull testing of welds,
etc.
Consider an indicator with load cell instead...
$1,700.00
Ex Tax:$1,700.00
Brand: Mark-10
Model: 5849
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands.
For converting USB, RS-232, and Mitutoyo communication.
Select RSU100 to convert RS-232 to USB or MU100 to convert Mitutoyo to USB.
Adapter, RS-232 to USBIncludes a 6' USB cable..
$135.00
Ex Tax:$135.00
Brand: Mark-10
Model: 5963
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands...
$125.00
Ex Tax:$125.00
Brand: Mark-10
Model: 7900
AC1056 Mark-10 Load cell mounting kit
Load cell mounting kit (included w/LC models)..
$480.00
Ex Tax:$480.00
Brand: Mark-10
Model: 8376
Travel is indicated on the control unit display, with output via USB.
An internal scale utilizing Renishaw technology produces significantly higher
accuracy than with conventional rotary encoder-based designs.
Backlash and nonlinearity are virtually eliminated...
$1,150.00
Ex Tax:$1,150.00
Brand: Mark-10
Model: 5942
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands...
$120.00
Ex Tax:$120.00
Brand: Mark-10
Model: 5928
For use with digital force gauges, digital torque gauges, digital force/torque indicators, and test stands.
These attachments are ideal for compression testing of buttons, membrane
switches, etc.
Compatible with Mark-10 force gauges...
$25.00
Ex Tax:$25.00
Brand: Mark-10
Model: 7351
Force gauge, 1000 lbF/16000 ozF/500 kgF/5000 N/5 kN
* Note: At 500 lbF(2,500 N)or more, force gauges are not recommended for
applications involving sudden, sharp breaks.
Examples include compression of brittle materials, pull testing of welds,
etc.
Consider an indicator with load cell instead...
$1,700.00
Ex Tax:$1,700.00
Brand: Mark-10
Model: 5943
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands.
Adapter, Mitutoyo to USB, 6' cable length for converting USB, RS-232, and
Mitutoyo communication.
Select RSU100 to convert RS-232 to USB or MU100 to convert Mitutoyo to USB...
$350.00
Ex Tax:$350.00
Brand: Mark-10
Model: 851
Column extension + $15 per inch
Select from several extension lengths.
Extensions increase clearance between the torque sensor and torque mounting plate...
$900.00
Ex Tax:$900.00
Brand: Mark-10
Model: 5844
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands.
Select from 3/8" (AC1014) or 1/4" (AC1014-1) diameters..
$175.00
Ex Tax:$175.00
Brand: Mark-10
Model: 5896
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands.
Includes a #10-32M/M stud with jam nuts...
$45.00
Ex Tax:$45.00
Brand: Mark-10
Model: 5917
For use with digital force gauges, digital torque gauges, digital force/torque indicators, and test stands.
These hooks are ideal for a variety of pull tests.
Select from four sizes...
$20.00
Ex Tax:$20.00
Brand: Mark-10
Model: 7352
Force gauge, 1500 lbF/24000 ozF/750 kgF/7500 N/7.5 kN
* Note: At 500 lbF(2,500 N)or more, force gauges are not recommended for
applications involving sudden, sharp breaks.
Examples include compression of brittle materials, pull testing of welds,
etc.
Consider an indicator with load cell instead...
$1,700.00
Ex Tax:$1,700.00
Brand: Mark-10
Model: 5594
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands.
Select from 3/8" (AC1014) or 1/4" (AC1014-1) diameters..
$175.00
Ex Tax:$175.00
Brand: Mark-10
Model: 5788
For use with, digital force gauges, digital torque gauges, digital force/torque indicators, and test stands.
Compatibility: Test stand bases w/#10-32 mounting
Includes:
1x G1081 eye end
1x G1080 anchor pin
2x G1079 lock ring..
$85.00
Ex Tax:$85.00
Brand: Mark-10
Model: 8377
The ESM303 may be fully controlled by a PC through a custom-written program in
any language supporting ASCII communications.
Also responds to the legacy Chatillon TCD command set and legacy Nexygen TCD
software(not available from Mark-10).
This option is not required for MESURgauge Plus software...
$1,150.00
Ex Tax:$1,150.00
Brand: Mark-10
Model: 8378
The stand stops at or cycles between programmable upper and lower travel distances...
$315.00
Ex Tax:$315.00
Brand: Mark-10
Model: 5898
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands.
Includes a 5/16-18M to #10-32F adapter and #10-32 M/M stud with jam nuts..
$255.00
Ex Tax:$255.00
Brand: Mark-10
Model: 5930
For use with digital force gauges, digital torque gauges, digital force/torque indicators, and test stands.
These hooks are ideal for a variety of pull tests.
Select from four sizes...
$15.00
Ex Tax:$15.00
Brand: Mark-10
Model: 7353
Force gauge, 2000 lbF/32000 ozF/1000 kgF/10000 N/10 kN
* Note: At 500 lbF(2,500 N)or more, force gauges are not recommended for
applications involving sudden, sharp breaks.
Examples include compression of brittle materials, pull testing of welds,
etc.
Consider an indicator with load cell instead...
$1,700.00
Ex Tax:$1,700.00
Brand: Mark-10
Model: 7902
SF009 Mark-10 Travel indication ESM1500/ESM750..
$1,985.00
Ex Tax:$1,985.00
Brand: Mark-10
Model: 5959
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands.
For securing Series R51 and Series R55 torque sensors to Series TST torque test stands...
$75.00
Ex Tax:$75.00
Brand: Mark-10
Model: 5789
For use with, digital force gauges, digital torque gauges, digital force/torque indicators, and test stands.
Compatibility: Test stand bases w/5/16-18 mounting
Includes:
1x G1081-1 eye end
1x G1080 anchor pin
2x G1079 lock ring..
$85.00
Ex Tax:$85.00
Brand: Mark-10
Model: 8379
Protects a force gauge or force sensor against overload.
Program the desired percentage of full scale of the gauge.
Adjustable analog voltage setting allows the stand to interface with virtually any gauge with analog output...
$315.00
Ex Tax:$315.00
Brand: Mark-10
Model: 5899
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands.
Includes a #10-32 M/M stud with jam nuts..
$375.00
Ex Tax:$375.00
Brand: Mark-10
Model: 5927
For use with digital force gauges, digital torque gauges, digital force/torque indicators, and test stands.
These hooks are ideal for a variety of pull tests.
Select from four sizes...
$25.00
Ex Tax:$25.00
Brand: Mark-10
Model: 7903
SF009-1 Mark-10 Travel indication ESM1500S/ESM750S..
$1,525.00
Ex Tax:$1,525.00
Brand: Mark-10
Model: 5960
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands.
For securing Series R51 and Series R55 torque sensors to Series TST torque test stands...
$75.00
Ex Tax:$75.00
Brand: Mark-10
Model: 5790
For use with, digital force gauges, digital torque gauges, digital force/torque indicators, and test stands.
Compatibility: Test stand bases w/1/2-20 mounting
Models MR07-300/-500/-750/-1000/-1500/-2000 load cells
Includes:
1x G1081-2 eye end
1x G1080 anchor pin
2x G1079 lock ring..
$85.00
Ex Tax:$85.00
Brand: Mark-10
Model: 8380
The crosshead moves to a limit switch, force set point, travel position, or break, then stops and reverses direction at full speed to the opposite limit...
$220.00
Ex Tax:$220.00
Brand: Mark-10
Model: 7355
COF gauge with G1086 coefficient of friction fixture..
$2,900.00
Ex Tax:$2,900.00
Brand: Mark-10
Model: 5900
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands.
Includes a #10-32 M/M stud with jam nuts..
$395.00
Ex Tax:$395.00
Brand: Mark-10
Model: 6806
For use with, digital force gauges, digital torque gauges, digital force/torque indicators, and test stands.
These hooks are ideal for a variety of pull tests.
Select from four sizes...
$30.00
Ex Tax:$30.00
Brand: Mark-10
Model: 4210
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands.
For securing Series R51 and Series R55 torque sensors to Series TST torque test stands...
$75.00
Ex Tax:$75.00
Brand: Mark-10
Model: 8381
Same as auto return, but with the ability to program up to 100,000 cycles.
Programmable dwell time for upper and lower limits(set independently) can be set up for up to 10,000 seconds...
$315.00
Ex Tax:$315.00
Brand: Mark-10
Model: 5901
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands.
Includes a #10-32 M/M stud with jam nuts..
$425.00
Ex Tax:$425.00
Brand: Mark-10
Model: 5920
For use with digital force gauges, digital torque gauges, digital force/torque indicators, and test stands.
For use between force gauges, test stands, grips, and attachments...
$20.00
Ex Tax:$20.00
Brand: Mark-10
Model: 5711
For use between force gauges, test stands, grips, and attachments...
$70.00
Ex Tax:$70.00
Brand: Mark-10
Model: 4211
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands.
For securing any Series R01 or R03 force sensor to any of the following Mark-10 force test stands:
- ES10 / ES20
- ES30
- TSA750 / TSA750H
- TSC1000 / TSC1000H
- TSF / TSFH
The kit contains br..
$120.00
Ex Tax:$120.00
Brand: Mark-10
Model: 5792
For use between force gauges, test stands, grips, and attachments...
$100.00
Ex Tax:$100.00
Brand: Mark-10
Model: 7490
Extends the standard speed range down to 0.02 in/min (0.5 mm/min)...
$220.00
Ex Tax:$220.00
Brand: Mark-10
Model: 5863
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands...
$165.00
Ex Tax:$165.00
Brand: Mark-10
Model: 5929
For use with digital force gauges, digital torque gauges, digital force/torque indicators, and test stands.
For use between force gauges, test stands, grips, and attachments...
$20.00
Ex Tax:$20.00
Brand: Mark-10
Model: 4212
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands.
Air connection kit consists of a complete set of components needed to connect two pneumatic grips:Coiled tubing, 1/8" OD, 1/16" ID, 8" retracted length (qty. 2)Y-splitter (qty. 1)Straight tubin..
$265.00
Ex Tax:$265.00
Brand: Mark-10
Model: 7491
Extends the standard speed range up to 45 in/min (1,100 mm/min)...
$220.00
Ex Tax:$220.00
Brand: Mark-10
Model: 5864
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands...
$170.00
Ex Tax:$170.00
Brand: Mark-10
Model: 5931
For use with digital force gauges, digital torque gauges, digital force/torque indicators, and test stands.
For use between force gauges, test stands, grips, and attachments...
$15.00
Ex Tax:$15.00
Brand: Mark-10
Model: 5793
This fully enclosed, air-powered grip is ideal for seal strength testing of
packaging, elongation testing of various materials, and other tensile testing
requirements, per ASTM F88/D1876.
Serrated interlocking jaws effectively grip samples for up to 100 lbF (500 N)
of force.
The grip features an ind..
$715.00
Ex Tax:$715.00
Brand: Mark-10
Model: 8138
Cushioned hard plastic carrying case provides storage space for the gauge, ACadapter, and attachments...
$45.00
Ex Tax:$45.00
Brand: Mark-10
Model: 4213
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands.
Maintenance kit*Consists of:A. Rubber membrane (qty. 5)B. Cotton swab (qty. 12)C. Alcohol wipe (qty. 5)D. Wrench set..
$110.00
Ex Tax:$110.00
Brand: Mark-10
Model: 5794
This fully enclosed, air-powered grip is ideal for seal strength testing of
packaging, elongation testing of various materials, and other tensile testing
requirements, per ASTM F88/D1876.
Serrated interlocking jaws effectively grip samples for up to 100 lbF (500 N)
of force.
The grip features an ind..
$50.00
Ex Tax:$50.00
Brand: Mark-10
Model: 7492
Crosshead stops at a sudden drop in force.
Programmable percentage of peak force...
$220.00
Ex Tax:$220.00
Brand: Mark-10
Model: 5865
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands...
$175.00
Ex Tax:$175.00
Brand: Mark-10
Model: 5932
For use with digital force gauges, digital torque gauges, digital force/torque indicators, and test stands.
For use between force gauges, test stands, grips, and attachments...
$20.00
Ex Tax:$20.00
Brand: Mark-10
Model: 5795
This fully enclosed, air-powered grip is ideal for seal strength testing of
packaging, elongation testing of various materials, and other tensile testing
requirements, per ASTM F88/D1876.
Serrated interlocking jaws effectively grip samples for up to 100 lbF (500 N)
of force.
The grip features an ind..
$35.00
Ex Tax:$35.00
Brand: Mark-10
Model: 4214
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands.
Note: When ordering models AC1020 through AC1025 with an ES10 or ES20 test stand, the optional AC1060 mounting plate is suggested. This ensures axial alignment between the force gauge loading ..
$110.00
Ex Tax:$110.00
New
Brand: Mark-10
Model: 8139
AC1030 AC adapter 110 VAC for Mark-10 M2 force gauge..
$45.00
Ex Tax:$45.00
Brand: Mark-10
Model: 5796
For use with, digital force gauges, digital torque gauges, digital force/torque indicators, and test stands...
$105.00
Ex Tax:$105.00
Brand: Mark-10
Model: 7493
Dynamically adjusts the crosshead position to maintain a programmed load for an indefinite or specified period of time...
$495.00
Ex Tax:$495.00
Brand: Mark-10
Model: 5971
Includes 10 data points in the tension and compression directions.
NIST-traceable...
$85.00
Ex Tax:$85.00
Brand: Mark-10
Model: 5905
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands...
$175.00
Ex Tax:$175.00
Brand: Mark-10
Model: 5933
For use with digital force gauges, digital torque gauges, digital force/torque indicators, and test stands.
For use between force gauges, test stands, grips, and attachments...
$20.00
Ex Tax:$20.00
Brand: Mark-10
Model: 8140
Available individually or as kits.
Select from hooks, flats, cones, chisels, v-grooves, and extension rods...
$100.00
Ex Tax:$100.00
Brand: Mark-10
Model: 4215
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands.
Note: When ordering models AC1020 through AC1025 with an ES10 or ES20 test stand, the optional AC1060 mounting plate is suggested. This ensures axial alignment between the force gauge loading ..
$110.00
Ex Tax:$110.00
Brand: Mark-10
Model: 5797
For use with, digital force gauges, digital torque gauges, digital force/torque indicators, and test stands...
$105.00
Ex Tax:$105.00
Brand: Mark-10
Model: 7494
Stops the crosshead and/or zeroes the travel display at an initial preload.
Useful in tensile, compression, spring, elongation, and other applications.
Preload is programmable as a percentage of force gauge/load cell full
scale.
Three modes: (1)stop, (2)stop and zero, and (3)zero without stopping...
$315.00
Ex Tax:$315.00
Brand: Mark-10
Model: 5906
For use with digital force gauges, digital torque gauges, digital force/torque indicators, and test stands.
Use these adapters between certain grips and force gauges to provide a
swiveling action for proper sample alignment.
Note: These adapters are designed for use in tensile (pull) testing applica..
$70.00
Ex Tax:$70.00
Brand: Mark-10
Model: 5908
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands...
$55.00
Ex Tax:$55.00
Brand: Mark-10
Model: 8141
Available individually or as kits.
Select from hooks, flats, cones, chisels, v-grooves, and extension rods...
$120.00
Ex Tax:$120.00
Brand: Mark-10
Model: 4216
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands.
Note: When ordering models AC1020 through AC1025 with an ES10 or ES20 test stand, the optional AC1060 mounting plate is suggested. This ensures axial alignment between the force gauge loading ..
$110.00
Ex Tax:$110.00
Brand: Mark-10
Model: 5718
For use with, digital force gauges, digital torque gauges, digital force/torque indicators, and test stands...
$105.00
Ex Tax:$105.00
Brand: Mark-10
Model: 7495
Save and recall sets of test parameters, such as speeds, travel limits,
preloads, etc.
Up to 50 profiles may be stored...
$630.00
Ex Tax:$630.00
Brand: Mark-10
Model: 5907
For use with digital force gauges, digital torque gauges, digital force/torque indicators, and test stands...
$70.00
Ex Tax:$70.00
Brand: Mark-10
Model: 5909
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands...
$75.00
Ex Tax:$75.00
Brand: Mark-10
Model: 7911
SF018 Mark-10 Extended speed range, high 1500/1500S..
$560.00
Ex Tax:$560.00
Brand: Mark-10
Model: 4217
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands.
Note: When ordering models AC1020 through AC1025 with an ES10 or ES20 test stand, the optional AC1060 mounting plate is suggested. This ensures axial alignment between the force gauge loading ..
$110.00
Ex Tax:$110.00
Brand: Mark-10
Model: 7496
Includes all Controller Options, plus 09-1124 and 09-1158 cables...
$4,540.00
Ex Tax:$4,540.00
Brand: Mark-10
Model: 5910
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands...
$95.00
Ex Tax:$95.00
Brand: Mark-10
Model: 6229
For use with, digital force gauges, digital torque gauges, digital force/torque indicators, and test stands.
For use between force gauges, test stands, grips, and attachments...
$55.00
Ex Tax:$55.00
Brand: Mark-10
Model: 7912
SF018-1 Mark-10 Extended speed range, high 750/750S..
$560.00
Ex Tax:$560.00
Brand: Mark-10
Model: 4218
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands.
Note: When ordering models AC1020 through AC1025 with an ES10 or ES20 test stand, the optional AC1060 mounting plate is suggested. This ensures axial alignment between the force gauge loading ..
$110.00
Ex Tax:$110.00
Brand: Mark-10
Model: 7497
Includes all Controller Options, plus 09-1252 and 09-1158 cables...
$4,540.00
Ex Tax:$4,540.00
Brand: Mark-10
Model: 6730
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands.
Includes mounting hardware for Series TST torque test stands..
$215.00
Ex Tax:$215.00
Brand: Mark-10
Model: 6230
For use with, digital force gauges, digital torque gauges, digital force/torque indicators, and test stands.
For use between force gauges, test stands, grips, and attachments...
$20.00
Ex Tax:$20.00
Brand: Mark-10
Model: 4219
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands.
Note: When ordering models AC1020 through AC1025 with an ES10 or ES20 test stand, the optional AC1060 mounting plate is suggested. This ensures axial alignment between the force gauge loading ..
$110.00
Ex Tax:$110.00
Brand: Mark-10
Model: 6731
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands.
Includes mounting hardware for Series TST torque test stands..
$240.00
Ex Tax:$240.00
Brand: Mark-10
Model: 6231
For use with, digital force gauges, digital torque gauges, digital force/torque indicators, and test stands.
For use between force gauges, test stands, grips, and attachments...
$20.00
Ex Tax:$20.00
Brand: Mark-10
Model: 4594
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands...
$110.00
Ex Tax:$110.00
Brand: Mark-10
Model: 6732
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands.
Includes mounting hardware for Series TST torque test stands..
$265.00
Ex Tax:$265.00
Brand: Mark-10
Model: 6232
For use with, digital force gauges, digital torque gauges, digital force/torque indicators, and test stands.
For use between force gauges, test stands, grips, and attachments...
$20.00
Ex Tax:$20.00
Brand: Mark-10
Model: 4595
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands...
$110.00
Ex Tax:$110.00
Brand: Mark-10
Model: 6733
This unique grip is designed for securing bottles, containers, and other items
for closure torque testing and force measurement.
Eight rubber edged gripping arms effectively grip a wide range of sample shapes
and sizes and can be individually positioned at angles of up to 180 degree.
The G1023 mount..
$595.00
Ex Tax:$595.00
Brand: Mark-10
Model: 6233
For use with, digital force gauges, digital torque gauges, digital force/torque indicators, and test stands.
For use between force gauges, test stands, grips, and attachments...
$20.00
Ex Tax:$20.00
Brand: Mark-10
Model: 7538
SFCOMP Mark-10 Complete options ESM1500/ESM750..
$6,835.00
Ex Tax:$6,835.00
Brand: Mark-10
Model: 4596
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands...
$110.00
Ex Tax:$110.00
Brand: Mark-10
Model: 5944
This fully enclosed, air-powered grip is ideal for seal strength testing of
packaging, elongation testing of various materials, and other tensile testing
requirements, per ASTM F88 / D1876.
Serrated interlocking jaws effectively grip samples for up to 100 lbF (500 N)
of force.
The grip features an i..
$715.00
Ex Tax:$715.00
Brand: Mark-10
Model: 6234
For use with, digital force gauges, digital torque gauges, digital force/torque indicators, and test stands.
For use between force gauges, test stands, grips, and attachments...
$20.00
Ex Tax:$20.00
Brand: Mark-10
Model: 7539
SFCOMP-1 Mark-10 Complete options ESM1500S/ESM750S..
$6,425.00
Ex Tax:$6,425.00
Brand: Mark-10
Model: 4597
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands...
$110.00
Ex Tax:$110.00
Brand: Mark-10
Model: 5945
This grip effectively secures round objects during torque and force
testing.
Reversible serrated jaws accommodate samples with diameters of 0.65 - 1.55 in
[16.5 - 39.4 mm] while an ergonomic, rubberized knob easily engages and
disengages samples.
A precision Acme screw provides durability and longev..
$385.00
Ex Tax:$385.00
Brand: Mark-10
Model: 6235
For use with, digital force gauges, digital torque gauges, digital force/torque indicators, and test stands.
For use between force gauges, test stands, grips, and attachments...
$20.00
Ex Tax:$20.00
Brand: Mark-10
Model: 4598
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands...
$110.00
Ex Tax:$110.00
Brand: Mark-10
Model: 6236
For use with, digital force gauges, digital torque gauges, digital force/torque indicators, and test stands...
$55.00
Ex Tax:$55.00
Brand: Mark-10
Model: 5946
This unique and universal grip is designed for gripping round and irregularly
shaped items.
The jaws open and close as the housing is rotated.
Typical applications including pull-off tests of fasteners and components in the toy, clothing, and other industries...
$350.00
Ex Tax:$350.00
Brand: Mark-10
Model: 4599
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands...
$110.00
Ex Tax:$110.00
Brand: Mark-10
Model: 6237
For use with, digital force gauges, digital torque gauges, digital force/torque indicators, and test stands.
For use between force gauges, test stands, grips, and attachments...
$20.00
Ex Tax:$20.00
Brand: Mark-10
Model: 5947
This grip is designed to effectively secure samples for torque and pull
tests.
Typical applications include bottle cap torque testing, lid pull-off testing,
and other tests requiring vise-action.
A matrix of threaded holes allows the serrated steel posts to be placed in
positions specific to the tes..
$475.00
Ex Tax:$475.00
Brand: Mark-10
Model: 4600
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands...
$90.00
Ex Tax:$90.00
Brand: Mark-10
Model: 6238
For use with, digital force gauges, digital torque gauges, digital force/torque indicators, and test stands.
For use between force gauges, test stands, grips, and attachments...
$20.00
Ex Tax:$20.00
Brand: Mark-10
Model: 4601
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands...
$90.00
Ex Tax:$90.00
Brand: Mark-10
Model: 6239
For use with, digital force gauges, digital torque gauges, digital force/torque indicators, and test stands.
For use between force gauges, test stands, grips, and attachments...
$20.00
Ex Tax:$20.00
Brand: Mark-10
Model: 4602
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands.
Designed to compensate for axial movement in torque tests of threaded
fasteners, bottle caps, etc.
The axial compensator has a hex tail which fits into the chuck of a Series R50 or TT03 torque..
$230.00
Ex Tax:$230.00
Brand: Mark-10
Model: 6240
For use with, digital force gauges, digital torque gauges, digital force/torque indicators, and test stands.
For use between force gauges, test stands, grips, and attachments...
$20.00
Ex Tax:$20.00
Brand: Mark-10
Model: 4603
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands...
$125.00
Ex Tax:$125.00
Brand: Mark-10
Model: 6756
For use with, digital force gauges, digital torque gauges, digital force/torque indicators, and test stands.
For use between force gauges, test stands, grips, and attachments...
$20.00
Ex Tax:$20.00
Brand: Mark-10
Model: 5196
This compact self-tightening grip with a capacity of 100 lbF (500 N) is ideal
for a range of low force tensile testing of small samples.
The serrated steel jaws are easily opened with an ergonomic spring-loaded lever...
$335.00
Ex Tax:$335.00
Brand: Mark-10
Model: 6757
For use with, digital force gauges, digital torque gauges, digital force/torque indicators, and test stands.
For use between force gauges, test stands, grips, and attachments...
$20.00
Ex Tax:$20.00
Brand: Mark-10
Model: 6758
For use with, digital force gauges, digital torque gauges, digital force/torque indicators, and test stands...
$80.00
Ex Tax:$80.00
Brand: Mark-10
Model: 5197
This general purpose vise can be used in a wide range of tension and
compression testing applications.
Wide opening range accommodates large and unique samples.
Rugged design permits testing up to 500 lbF (2,500 N).
The G1106 self-centering vise grip offers smooth removable jaws can be field-modifie..
$370.00
Ex Tax:$370.00
Brand: Mark-10
Model: 7455
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands.
Automates common force gauge and indicator functions for improved testing
ergonomics and efficiency, eliminating the need for multiple key presses.
Up to three functions, separated by configur..
$205.00
Ex Tax:$205.00
Brand: Mark-10
Model: 6759
For use with, digital force gauges, digital torque gauges, digital force/torque indicators, and test stands.
For use between force gauges, test stands, grips, and attachments...
$20.00
Ex Tax:$20.00
Brand: Mark-10
Model: 5198
This set of fixtures is used to produce a 90 degree bend in fiber board
materials and plastics.
The fixtures are compliant to TAPPI standard T829 for evaluating the relative
quality of scores in corrugated containers.
Upper and lower fixtures are easily removable.
Use this fixture with a choice of t..
$530.00
Ex Tax:$530.00
Brand: Mark-10
Model: 7456
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands.
Four #6-32 thumb screws for gauge mounting (up to 500 lbF capacities)
Two 5/16-18 flat head screws for plate mounting..
$60.00
Ex Tax:$60.00
Brand: Mark-10
Model: 5199
Used to determine the opening force of flat folded cartons along their score
lines.
Ideal for numerous applications in the packaging, food and beverage, medical
device, consumer products, and many other industries.
Upper and lower fixtures are easily removable.
Use this fixture with a choice of test..
$480.00
Ex Tax:$480.00
Brand: Mark-10
Model: 7457
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands.
Four #6-32 thumb screws for gauge mounting (up to 500 lbF capacities)
Four #10-32 thumb screws for gauge mounting (750 lbF - 2,000 lbF capacities)
Two 5/16-18 flat head screws for plate mountin..
$90.00
Ex Tax:$90.00
Brand: Mark-10
Model: 5200
This grip is designed for wire pull testing applications.
The grip secures wire terminals, cables, connectors, and other samples for wire
pull tests.
Grooves of multiple sizes are provided to accommodate a wide range of wire
diameters up to 0.25 in.(6.3 mm).
Simply rotate the turret wheel to the des..
$495.00
Ex Tax:$495.00
Brand: Mark-10
Model: 6761
For use with, digital force gauges, digital torque gauges, digital force/torque indicators, and test stands.
For use between force gauges, test stands, grips, and attachments...
$20.00
Ex Tax:$20.00
Brand: Mark-10
Model: 7458
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands...
$175.00
Ex Tax:$175.00
Brand: Mark-10
Model: 6762
For use with, digital force gauges, digital torque gauges, digital force/torque indicators, and test stands...
$10.00
Ex Tax:$10.00
Brand: Mark-10
Model: 5201
This grip is designed for ergonomic assessment, spring testing, and other pull
testing applications.
A spring loaded pin with ball plunger locks into place, for added safety during
testing.
Included with all Mark-10 ergonomics testing kits...
$145.00
Ex Tax:$145.00
Brand: Mark-10
Model: 7459
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands.
For securing any Mark-10 indicator and Series R01 or R03 force sensor to a
Mark-10 ESM303 force test stand.
The kit consists of brackets and hardware.
Indicator-test stand interface cable is no..
$265.00
Ex Tax:$265.00
Brand: Mark-10
Model: 6763
For use with, digital force gauges, digital torque gauges, digital force/torque indicators, and test stands...
$10.00
Ex Tax:$10.00
Brand: Mark-10
Model: 5202
For securing small diameter wires and filaments in pull tests.
The sample wraps around the bollard and the loose end is secured by the
adjustable jaw.
Integrated swivel ensures sample alignment under load...
$350.00
Ex Tax:$350.00
Brand: Mark-10
Model: 6764
For use with, digital force gauges, digital torque gauges, digital force/torque indicators, and test stands...
$10.00
Ex Tax:$10.00
Brand: Mark-10
Model: 5203
This cam grip secures the ends of tubing, cables, and odd shaped samples for
pull testing applications.
Engaging and disengaging samples is quick and easy, with a side slot for sample
insertion and serrated steel rollers.
The rollers can be repositioned to the desired spacing, accommodating a broad ..
$475.00
Ex Tax:$475.00
Brand: Mark-10
Model: 8422
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands...
$100.00
Ex Tax:$100.00
Brand: Mark-10
Model: 5204
The G1086 COF fixture is an integral part of a COF measurement system,
typically including a motorized test stand and COF gauge.
The G1086 can be used for a wide range of materials, ideal for conformance to
ASTM D1894 and other relevant standards.
Static and kinetic coefficients can be measured usin..
$1,785.00
Ex Tax:$1,785.00
Brand: Mark-10
Model: 8423
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands...
$90.00
Ex Tax:$90.00
Brand: Mark-10
Model: 5205
The plates feature integrated eye ends, and require eye end adapters to mount to Mark-10 force gauges, load cells, and test stands...
$250.00
Ex Tax:$250.00
Brand: Mark-10
Model: 8424
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands...
$90.00
Ex Tax:$90.00
Brand: Mark-10
Model: 5206
The plates feature integrated eye ends, and require eye end adapters to mount to Mark-10 force gauges, load cells, and test stands...
$120.00
Ex Tax:$120.00
Brand: Mark-10
Model: 8425
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands...
$90.00
Ex Tax:$90.00
Brand: Mark-10
Model: 5207
This fixture is designed to test compression force of a syringe plunger, as per
ISO 7886-1 and other relevant standards.
Four blank stainless steel inserts are included, and may be drilled in the
field to accommodate various diameter barrels.
When used with appropriate instruments, such as an ESM303..
$1,135.00
Ex Tax:$1,135.00
Brand: Mark-10
Model: 7804
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands.
Additional set of rollers for bend fixtures, 10 mm dia., set of 4 (included with bend fixture bases)..
$90.00
Ex Tax:$90.00
Brand: Mark-10
Model: 5208
This grip is designed for various pull testing applications, including
extension spring testing, chain link break force testing, and other
applications.
A spring loaded pin with ball plunger locks into place, for added safety during
testing.
Includes integrated eye end mounting, and requires an eye ..
$385.00
Ex Tax:$385.00
Brand: Mark-10
Model: 7805
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands.
Set of three test strips (one strip is included with the fixture)...
$175.00
Ex Tax:$175.00
Brand: Mark-10
Model: 6375
Designed for high capacity wire and rope pull testing applications.
Secures the free end of the sample via a bollard and vise.
Includes integrated eye end mounting, and requires an eye end adapter to mount to Mark-10 force gauges or force sensors, and test stands...
$960.00
Ex Tax:$960.00
Brand: Mark-10
Model: 7806
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands.
Pair of jaws, G1100, 2.36" length (included with G1100)..
$335.00
Ex Tax:$335.00
Brand: Mark-10
Model: 6376
The grip secures wire terminals, cables, connectors, and other samples for high
capacity wire terminal pull tests.
To operate, simply rotate the turret wheel to the desired size.
For unique sample shapes and sizes, the wheel may be machined as required.
Integrated eye end mounting...
$1,590.00
Ex Tax:$1,590.00
Brand: Mark-10
Model: 7807
For use with digital force gauges, digital torque gauges, digital force/torque indicators and test stands.
Pair of jaws, G1100, 3.94" length..
$380.00
Ex Tax:$380.00
Brand: Mark-10
Model: 6377
This rugged grip features a serrated cam, for effectively securing wires,
plastics, textiles, and other materials in pull testing applications.
Includes an integrated eye end mount...
$1,135.00
Ex Tax:$1,135.00